With decades of experience in remanufacturing commercial vehicle parts such as compressors, air dryers, valves, and brake shoes, Bendix Commercial Vehicle Systems LLC recognizes the value that remanufactured parts can bring to fleets and trucks. As part of its Bendix Tech Tips series, Bendix experts offer advice on choosing, inspecting, and installing remanufactured parts. 

Reman versus Rebuild 

“Selecting quality remanufactured parts begins with the right sourcing – knowing what to look for, and knowing what questions to ask the part supplier,” said Henry Foxx, Bendix director of remanufactured products. “And among the first and most crucial things to learn is whether you’re dealing with a true parts remanufacturer or a rebuilder.” 

There’s a vast difference between the two. 

When a rebuilder disassembles the core of a part for reuse – an air compressor, for instance – they don’t necessarily replace the components of that product with new ones or bring the product back to its original equipment manufacturer (OEM) performance level. Rebuilders may simply clean or repaint components, or replace them with inferior versions since they may not have full access to OEM-quality components such as pistons, connecting rods, or crankshafts. 

Remanufacturing, on the other hand, always involves either replacing or repairing a core’s components to bring the part up to OEM specs. Additionally, some components – referred to as wear components – are always replaced with new versions during remanufacturing. Wear components such as gaskets, washers, and O-rings are never reused by a true remanufacturer. 

Questions to Ask 

When developing a strategy to use remanufactured parts in your operation, it’s vital for fleet managers to arm themselves with as much information as possible. Here are four questions you must ask of any potential remanufacturing partner: 

  • Do they replace non-salvageable or irreparable components with new? 
  • Do they replace wear components 100 percent of the time? 
  • What type of tests do they conduct to validate the performance of their parts? 
  • How do they support the product through warranties and/or service needs? 

Those latter questions will help you address the post-sale concerns of dependable parts and reliable technical support. 

The definitive gauge of any remanufactured part is how it performs once it’s off the assembly line and on the vehicle. Bendix, for example, conducts end-of-line testing on its remanufactured parts, while many rebuilders can only offer limited testing. 

A strong post-sales support system is another important consideration, from the length of warranty coverage to the geographic availability of parts and service locations. 

Tips for Technicians 

Selecting the proper remanufacturer is just the beginning. Fleets and drivers rely on skilled technicians for quality inspection and installation of remanufactured parts. 

From a true remanufacturer, technicians should expect a part that will perform as well as the one that was originally on the truck and has been updated, if necessary, to the latest specifications. They should also expect parts that come ready for a complete installation, including any necessary wear components. 

Bendix offers the following tips for reference during inspection and installation of remanufactured parts: 

  • Air compressors – Have the flanges been refinished to a flat, smooth surface? Are there new gaskets provided for the installation? 
  • Brake shoes – Inspect the friction used for relining: Has it been certified for Reduced Stopping Distance compliance, or has the shoe been fitted with a low-
  • Cost, lower-performing substitute? Bendix RSD shoes feature a warning label to educate customers about proper friction selection to maintain RSD compliance. 
  • Electronics (such as radar units) – Ensure the operating software has received the latest OEM updates. 

By partnering with a skilled, supportive, and established remanufacturer, fleets, technicians, and drivers can maintain full confidence in high-quality alternatives to new parts, saving themselves replacement costs and extending vehicle life. 

Bendix provides commercial fleets, technicians, and drivers with the tools they need to ensure safe operation through assessment, maintenance, and repair. The Bendix On-Line Brake School at www.brake-school.com provides access to the company’s knowledge database and technical resources on all aspects of electronics and air brake maintenance and product education. 

About the Bendix Tech Tips Series 

Bendix, the North American leader in the development and manufacture of leading-edge active safety and braking system technologies, is committed to helping keep commercial vehicles on the road and in good working condition. The Bendix Tech Tips series addresses common commercial vehicle maintenance questions and issues concerning the total range of components found within foundation and air brake systems, as well as advanced safety systems.

Download Tech Tip

Tech Tips

Technical advice on the topics that matter most.

Protecting Wheel-Ends in Off-Highway and Severe Duty Applications

Construction site haulers, cement trucks, and other haulers face increased risks of contamination and corrosion.

Read More

Trailer Stability Systems

Whether your fleet is large or small, nobody wants to deal with a rollover: They’re dangerous, expensive, and can damage your reputation. Get some insights on the operation and maintenance of trailer roll stability systems that are designed to help prevent rollovers.

Read More

What to Look for in Remanufactured Parts

How to select the right air compressors, air disc calipers, drum brake shoes and steering gears.

Read More